diy aquaponics manual | Epic adventurer Think steering and kill switches

diy aquaponics manual

I built a more sturdy frame to hold the solar panels.

It sits quite low to the back half of the boat.. On my epic adventure, Ill add 4 extension tubes so that I can get under the frame and use the space (and perhaps even sleep under if), but when I just go our for a day trip, Ill leave the tubes off, and keep it low. It needs to be low so it can travel on highways on the trailer without shaking to bits, or catching too much wind. 

Im mounting the entire assembly on hinges so I can lift one side at a time to add the extension tubes before I set off.  

The panels were originally going to be mounted on hinges as well so I could tilt them to the sun as required, but I figured Id keep it simple and see how much cruising time I have per day without moving them. I can always add hinges later.

The frame looks a bit like this...

 (you might recognise it as my old aquaponics growhouse with some bits re-aranged), but I might cut some more bits off to shorten it a little. Its around 200mm longer than the solar panels, so the rest is just excess weight. 












120 Things in 20 years thinks it might actually happen. Some of it already works!

Do you find information about diy aquaponics manual are you looking for? If not, below may help you find more information about the diy aquaponics manual. Thank you for visiting, have a great day.